Sanyo PDG-DWL2500 Owner's Manual page 47

Keystone
This function is used to adjust keystone distortion of the
projected image. Use the Point
item you want to adjust.
Keystone
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point
buttons to correct keystone distortion (p.26).
Store or Reset
To store or reset the keystone correction, press the Point
8 button.
Store ..... Keep the keystone correction even when the AC
power cord is unplugged.
Reset ..... Release the keystone correction when the AC
power cord is unplugged.
Ceiling
When this function is set to On, the picture will be top/
bottom and left/right reversed. This function is used to
project the image from a ceiling-mounted projector.
Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from
rear of the screen.
Screen aspect
This function is used to project the image to a 4:3 or 16:9
projection screen.
:3 ...................... Set to a 4:3 projection screen.
16:9 .................... Set to a 16:9 projection screen.
Default(16:10) .... 16:10 is the aspect of the DLP chip. The
original Screen Menu is available.
Colorboard
Press the Point button at Colorboard, and then use the
8
Point ed buttons to switch the desired item [Red, Blue,
yellow, Green, Blackboard(Green)] and then press the
SELECT button.
At the time of simple projection on the colored wall, you can
get the close color image to the color image projected on a
white screen by selecting the similar color to the wall color
from the preset colors.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
ed buttons to choose the
ed
Keystone
Ceiling
Rear
4Note:
• When 4:3 is selected, Natural wide is not
available in the AV screen (p.46).
• When 16:9 is selected, Wide(16:9) is not
available in the AV screen (p.46).
• When 16:9 is selected and the input signal
is 720p or 1080i, Natural wide is not
available in the AV screen (pp.43, 46).
• When the screen size is resized by the
ZOOM +/– button on the top control and
then 4:3 or 16:9 is selected, the screen size
will be reset and the Screen aspect will be
available.
Video Input