Image Adjustment - Sanyo PDG-DWL2500 Owner's Manual

1
Press the MENU button to display the On-Screen
Menu. Use the Point
adjust and then press the Point
button.
2
Use the Point ed buttons select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Color temp .
Use the Point 7 8 buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
White balance (Red / Green / Blue)
Press the Point 7 button to lighten R/G/B tone; press the
Point 8 button to deepen R/G/B tone (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point 8
of the image (from 0 to 15).
Gamma
Use the Point 7 8 buttons to adjust the gamma value to
obtain a better balance of contrast (Default, 1 .8, 2 .0, 2 .2,
2 ., or 2 .6).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the Point
8 or the SELECT button. Use the Point
select one from Image 1 to  and press the SELECT button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1-) in the
Image Mode Selection on page 36.

Image Adjustment

ed buttons to select Image
8 or the SELECT
7 8
buttons to
button to increase the sharpness
ed buttons to
Image adjust Menu
Selected Image mode
Use the Point
buttons to adjust the
setting value.
4Note:
• When White balance Red, Green or Blue is
adjusted, Color temp. will change to User.
Store Menu
A confirmation box appears and
then select yes .
Computer Input
7 8
3