Computer Input; Input Source Selection - Sanyo PLC-XU105 Owner's Manual

Computer Input

Input Source Selection

Direct Operation
Choose either Computer 1 or Computer 2 by pressing the
INPUT button on the top control or press the COMPUTER
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1 Press the MENU button to display the On-Screen
Menu. Press the Point
frame pointer to the Input Menu icon.
2 Press the Point
pointer to either Computer 1 or Computer 2, and then
press the SELECT button.
3 When selecting Computer 1, input source will be
selected directly.
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.

Notes:
• Computer 1 can accept only RGB signal.
• When the Input Search function is set to "On1" or "On2",
the input signal will be searched automatically (p.47).
◄►
buttons to move the red
▲▼
buttons to move the red arrow
Top Control
INPUT button
REMOTE CONTROL
COMPUTER button
Input Menu
Move the pointer (red arrow)
to Computer 1 and press the
SELECT button.
Input Menu icon
Input Menu
Move the pointer (red arrow)
to Computer 2 and press the
SELECT button.
Computer

Source Select Menu
Move the pointer to RGB
and press the SELECT
button.
Computer 1
Computer 
VIDEO
Computer 1
Computer 
7