Sanyo PDG-DWL2500 Owner's Manual page 55

Enter a Logo PIN code
Use the Point buttons to enter a number. Press the
ed
Point button to fix the number and move the red frame
8
pointer to the next box. The number changes to [. If
you fixed an incorrect number, use the Point
move the pointer to the number you want to correct, and
then enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the pointer to
Set and press the SELECT button.
If you entered an incorrect Logo PIN code, Logo PIN
code and the number ([[[[) will turn red for a moment.
Enter the correct Logo PIN code all over again.
Change the Logo PIN code lock setting
Use the Point buttons to switch On or Off, and then
ed
press the SELECT button to make a choice.
Logo PIN code change
Logo PIN code can be changed to your desired four-
digit number. Press the SELECT button to select Logo
PIN code change. Current logo PIN code dialog box
appears, use the Point
ed
code. The New Logo PIN code input dialog box appears.
Set a new Logo PIN code, confirmation box appears,
choose yes to set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on
hand. If you lost the number, you could no longer change
the Logo PIN code setting.
CAUTION:
WHEN yOU HAVE CHANGED THE LOGO PIN CODE,
WRITE DOWN THE NEW PIN CODE IN COLUMN OF
THE LOGO PIN CODE NO . MEMO ON PAGE 80, AND
KEEP IT SECURELy . SHOULD THE LOGO PIN CODE
BE LOST OR FORGOTTEN, THE LOGO PIN CODE
SETTING CAN NO LONGER BE CHANGED .
button to
7
buttons to enter the correct
Enter a Logo PIN code
Logo PIN code change
Setting
55