3D Display; For Viewing 3D Contents - Sanyo PDG-DWL2500 Owner's Manual

3D Display

To view 3D images, you need to prepare at least the 3D active shutter glasses, 3D content and 3D reproducing
equipment. For example, as for computer, when transmitting 3D signals from a computer to the projector, you
also need to install the graphic card which has the capability to sequentially output the 3D frames at 120Hz and
software in the computer. The 3D signal type which the projector can accept is frame sequential only. Other 3D
signal types such as frame packing and side-by-side are not supported.
As for 3D glasses, DLP Link format and IR emitter format are compatible with this projector. Compatibility with
any other 3D glasses than the 2 types 3D glasses is not guaranteed.
Using 3D Glasses with DLP Link compatible
When using DLP Link compatible glasses, follow these
steps:
1. Turn on the projector and the 3D glasses.
2. Wear the 3D glasses and press the 3D button on the
remote control to activate 3D Display function.
When 3D mode is in On, 3D indicator turns blue.
3. If you see a discrete or overlapping image, 3D Sync
Invert function enables you to get the correct image.
Press the 3D button to switch 3D Sync signal from among
"3D Off", "3D (Sync 1)" or "3D (Sync 2)".
3D setting can also be selected from the menu (p.52).
Using 3D Glasses with IR wireless emitter
When using IR emitter system, follow these steps:
1. Turn off the projector.
2. Connect the sync cable for the IR emitter to 3D SYNC
OUT terminal of the projector.
3. Turn on the projector, the IR emitter and the stereoscopic
wireless LCD glasses.
4. Wear the 3D glasses and press the 3D button on the
remote control to activate 3D Display function.
5. If you see a discrete or overlapping image, press the 3D
button to switch 3D Sync signal from among 3D Off, 3D
(Sync 1) or 3D (Sync 2).
You can also invert the sync signal by using the switch on
the IR emitter.
8

For Viewing 3D Contents

Unplug the power cords of
both the projector and external
equipment from the AC outlet
before connecting cables.
LCD Glasses with DLP
Link compatible
Remote Control
3D button
Stereoscopic Wireless
LCD Glasses
Sync Signal Cable
(Supplied with the IR Emitter)
3D Mode
3D Off
3D (Sync 1)
3D (Sync 2)
Infrared Emitter
3D SYNC Input
3D SYNC OUT