Siemens SINUMERIK 840D sl Operating Manual page 308

Tool management
7.6 Tool wear
Column heading
Tool life
Workpiece count
Wear *
*Parameter depends on
selection in TC
G
Icons in the tool wear list
Icon/
Designation
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
308
Meaning
Tool life
Number of workpieces
Tool wear
The tool is disabled when the checkbox is selected.
1. Select the "Parameter" operating area.
2. Press the "Tool wear" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning