Programming a cycle
4.4 Drilling
Procedure
Help screens
Help with selection of parameter RP, for example.
160
1.
Select the part program to be edited in the "Program manager"
operating area.
2.
Press the "Open" softkey or the "INPUT" key to edit the part program
in the editor.
3.
Press the "Drilling" softkey.
4.
Press the "Deep-hole drilling" softkey.
The "Deep-hole Drilling" input window opens.
Operating Manual, 01/2008, 6FC5398-7AP10-0BA0
HMI sl Turning