14. Swivel the plug-in unit upwards until the connector frame clicks into place.
10.4 Removing/Replacing Connectors
Explosion Risk - Prior to starting work, ensure that there is not a potentially
explosive atmosphere.
Warning
In the event of the machine/system being put into a dangerous state as a
result of the removal of a connector, a replacement can only be made once the
machine/system is disconnected from the power.
Caution
Risk of contact fire - Remove connectors only while they are load current free.
Caution
The components in the RSTi-EP series can be destroyed by electrostatic
discharge. Ensure that personnel and work equipment are adequately
grounded.
Caution
GFK-2958E
RSTi-EP User Manual
Chapter 10 Replacing Components
391