Table of Contents
Advertisement
5. Right-click on the interface and select Update driver software. You will be asked if you would
like to search for the driver software.
6. Select Search for driver software on this computer.
7. Click Browse and select the folder in which you have stored both .inf files and click Next.
Note: There could be a security inquiry because the driver software does not have a
signature. Nonetheless, continue with the installation.
8. Follow the rest of the steps in the installation routine until the successful installation is
confirmed. The driver displays in the Device Manager under Network adapters.
9. Close the Device Manager.
9.3 Starting the Web Server
Note: Simultaneous access via both interfaces to the webserver is not possible. Make sure that there
is no USB connection before you start the access via Ethernet.
➢ To start the web server
1. Open an internet browser.
2. In the address line, enter the IP address of the network adapter (default: 192.168.1.202).
GFK-2958E
RSTi-EP User Manual
Chapter 8 Web Server
362
Advertisement
Table of Contents
