7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.2.8
ReadCRL is used for the client to read the static portion or dynamic portion of the CRL.
The number of CRL entries than can be read with 1 ReadCRL is 1. To read all of the CRLs LoadCRL
must be repeated once for each CRL to be read.
[Parameters required by the client]
• Desired CREF
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
• CRL Entry
CRL read (ReadCRL: Server)
Specify the No. of the CRL entry to be read.
Desired CREF
0
No. of the CRL entry to be read.
This sets the CRL Entry data.
Explanation
Reads the CRL header.
CRL Entry No. to read
7-35
MELSEC-A