7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.2.6
After the InitiateLoadCRL is successful the CRL static portion data is actually set.
The number of CRL static entry that can be loaded with 1 LoadCRL is 1. To load all of the CRLs
LoadCRL must be repeated once for each CRL to be loaded.
[Parameters required by the client]
• CRL Entry static (CRL entry static portion)
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
7.2.7
This is used to announce that the CRL setting has ended.
[Parameters required by the client]
None
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
CRL setting (LoadCRL: Server)
Set the CRL entry static portion.
CRL setting end (TerminateLoadCRL: Server)
7-34
MELSEC-A