7. COMMUNICATION THAT DO NOT REQUIRE
THE SEQUENCE PROGRAM
7.1.22
Use "Stop" service to PAUSE the sequence program from the client.
This can only be executed when the PC CPU status is Operational or Partially Operational. (Use
Status service to check the status.)
PI status change
Status after execution
Use the GetOD service to check the PI status.
[Parameters required by the client]
• Access Specification
[Server (AJ71PB96F/A1SJ71PB96F) answer parameters]
None
Program pause (Stop: Server)
NON-EXISTENT
×
Specify the Index or Name of the Program Invocation to be paused.
Access Specification
Index
PI Name
PI status before execution
IDLE
×
Setting value
PI Index
PI Name
7-27
MELSEC-A
RUNNING
STOPPED
×
STOPPED