Ports And Buttons - TP-Link TL-MR6400 User Manual

On
Off
(Wireless)
On
Off
(LAN)
On/Off
(WPS)
Flashing
On
(Signal
Strength)
Off
1.2.2

Ports and Buttons

The following parts are located on the rear panel (View from left to right).
Status
POWER
POWER ON/OFF
LAN (1, 2, 3)
LAN4/WAN
WPS/RESET
WiFi ON/OFF
SIM Card
The wireless function is enabled.
The wireless function is disabled.
At least one LAN port is connected to a powered-on device.
No LAN port is connected to a powered-on device.
This light remains on for 5 minutes when a WPS connection is
established, then turns off.
WPS connection is in progress. This may take up to 2 minutes.
Indicates the signal strength received from the mobile internet
network. More lit bars indicate a better signal strength.
There is no mobile internet signal.
The power socket is where you will connect the power adapter. Please
use the power adapter provided.
The switch for the power.
These ports (1, 2, 3) connect the router to the local PC(s).
This port can be LAN or WAN port depending on the working mode.
The switch for the WPS function or resetting the modem router. Refer to
the note below for more information.
This switch is used to enable/disable the router's wireless function.
Insert the SIM card into the slot.
Indication
-3-
TL-MR6400 User Guide