Local Management - TP-Link TL-MR6400 User Manual

UDP-FLOOD Packets Threshold (5~3600)

between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set value,
the router will startup the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering

Attack Filtering.
TCP-SYN-FLOOD Packets Threshold (5~3600)

between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is beyond the
set value, the router will startup the blocking function immediately.
Ignore Ping Packet from WAN Port to Router

WAN Port to Router. The default setting is disabled. If enabled, the ping packet from
internet cannot access the Router.
Forbid Ping Packet from LAN Port to Router

LAN Port to Router. The default setting is disabled. If enabled, the ping packet from LAN
cannot access the Router. (Defends against some viruses).
Click Save to make the settings effective.
Click Blocked DoS Host List

5.10.3 Local Management

Go to Security Local
→
screen as shown below. The management feature allows you to deny computers in LAN from
accessing the router.
By default, the radio button
Web-Based Utility" is checked. If you want to allow PCs with specific MAC Addresses to access
the Setup page of the router's Web-Based Utility locally from inside the network, check the radio
button "Only the PCs listed can browse the built-in web pages to perform Administrator
to display the DoS host table by blocking.
Management, and then you can configure the management rule in the
"All the PCs on the LAN are allowed to access the Router's
-102-
- The default value is 500. Enter a value
- Enable or Disable the TCP-SYN-FLOOD
- The default value is 50. Enter a value
- Enable or Disable Ignore Ping Packet from
- Enable or Disable Forbid Ping Packet from
TL-MR6400 User Guide
tasks",