Lte Data Settings - TP-Link TL-MR6400 User Manual

 PAP - Password Authentication Protocol. This protocol allows the device to establish
authentication with the peer using two handshakes. Select this option if the ISP
requires this authentication type.
CHAP - Challenge Handshake Authentication Protocol. This protocol allows the device

to establish authentication with the peer using three handshakes and checking the
peer identity periodically. Select this option if the ISP requires this authentication type.
Click Delete to delete a profile.
Click Create to create a new profile.
Click Save to make the settings effective.
4.5.2

LTE Data Settings

Go to Network LTE Data
→
Total/Monthly Used

data amount to correct the data.
Data Limit - You can enable or disable the function of data limit. If enabled, you can set the

data quota and usage alert.
Total/Monthly Allowance

exceeds the allowance, the device will disconnect internet and display a message on the
screen asking whether to connect internet.
Monthly Data Statistic

Start Date - Enable the function and schedule a date, the data will reset to zero on the date.

If disabled, total data information is displayed. If enabled, monthly data information is
displayed.
Click Save to make the settings effective.
Settings, you can configure data settings on this page
- Total/Monthly data used. You can click
- Set the allowed amount of total/monthly data. When data usage
- You can enable or disable the function of traffic data resetting.
Correct
-25-
TL-MR6400 User Guide
.
and input the actual