Extron electronics MLC 104 IP Plus Series User Manual page 138

Configure the Display Power buttons on the MLC to operate the digital
outputs
1. Click the Front Panel tab (see image below).
2. Click on the MLC Display On button.
NOTE: In the example below, the red triangle in the upper left corner of this button
indicates that the button has already been configured to send the power-on
command to the projector.
3. Type in text for the onscreen button label and the tool tip (text that appears when the
mouse pointer hovers over that button in GlobalViewer), if desired.
4.
In the Button Operations panel, click the Digital Output tab (see image
below).
5. Under Digital Output #1, click Off.
This command ensures that the relay is open (off) before it is pulsed.
6. Click the green arrow ( ) adjacent to the Press area or drag the command to the
Press area.
MLC 104 IP Plus Series • Special Applications 130