Blocked Cids - Samsung OfficeServ User Manual

Parameter
Do not allow to answer other
calls when a call exists

Blocked CIDs

This tab enables the user to block undesired calls. Calls from the phone numbers registered to
the block list are automatically transferred to the station set in the [Blocked Calls Redirect to]
tab of the [General] menu.
Parameters of the [Blocked CIDs] tab are described below:
Parameter
Type a CID
Block List
Description
Any newly incoming calls will be rejected when the user is
busy.
Description
Enter a phone number and click [Add] to register the
number to the block list.
If '2*' is entered, all calls from numbers starting with 2 are
blocked.
If '21#' is entered, all calls from numbers ranging from 210
to 219 are blocked.
The external numbers should be entered in a format as
same as that of the CLIP table.
Displays the registered block list.
Select a phone number from the block list and click
[Delete]. Then, the number will be deleted from the list. Up
to ten phone numbers can be registered to the block list.
50
Home Page
Table of Contents