General - Samsung OfficeServ User Manual

General

This tab enables the user to set general option values of the OfficeServ Operator.
Parameters of the [General] tab are described below:
Parameter
Extension Passcode
OfficeServ Link IP Addr.
OfficeServ Link Port
Calls with out of Service
DID Redirect to
On Unavail Redirect to
Blocked Calls Redirect to
Default Page Zone
Description
Enter the passcode of the extension phone.(default : 1234)
Enter the IP address of the OfficeServ Link connected to the
OfficeServ system.
Enter the port number of the OfficeServ Link.(default : 6000)
Enter the number of the station to which incoming calls
connected to the unselected DID number are transferred. If
this value is not entered, the incoming calls above will be
connected to the OfficeServ Operator.
Enter the extension number to which incoming calls are
transferred when the OfficeServ Operator is not available. Or,
Double-click AVAIL/UNAVAIL from the status bar to select an
extension number.
Enter the extension number to which blocked calls are
transferred.
If 'Automatic Drop' is selected, a blocked call is transferred to
the entered extension number and is dropped automatically.
In this case, a virtual port of the system can be conveniently
used.
Enter a value for the default page zone.
If a user makes a page without designating a zone while the
default page zone is not set, the page will be made to Zone 0.
43
Home Page
Table of Contents