Columns - Samsung OfficeServ User Manual

Parameter
Station Speed Dials
Reflect the configuration
changes of the switch in
real time except DT/DS
buttons and Station
Speed Dials
Number of Set Parameters
Selecting more parameters will extend the initialization time since more
NOTE
information must be retrieved from the system.

Columns

This tab enables the user to select the information to be displayed on the Incoming Calls,
Active Calls, and Held Calls windows.
Parameters of the [Columns] tab are described below:
Category
Incoming Calls
Active Calls
Held Calls
Retrieves the speed dial information set in the operator's
phone.
Sets whether to apply in real time the changes in system
information, such as the DID table, CLIP table or station group
setup.
Parameter
CID Telephone number and name of the other party
DID DID number and name
Duration Time elapsed since the call was displayed on the list
Detail Additional information such as re-termination or transfer
45
Description
Description
Home Page
Table of Contents