Blf (Busy Lamp Field) Window - Samsung OfficeServ User Manual

BLF (Busy Lamp Field) Window

The <BLF> window shows that the device is being used. Also, this window displays the status
of the office users who use the iDCS system. OfficeServ Operator users can create the
desired BLF group by using the device information received from the system. The users can
set an environment for use by changing the names displayed in each device.
The BLF device is displayed in the format of a card, list, or number. Icons are displayed at the
left of phone numbers depending on device status. If the device of the selected BLF group is
more than 100, the device will be displayed only in the format of a list or number.
The BLF device in the format of a card displays the status of absent messages or voice
messages and notes. The device can be searched based on phone number, name, or note.
The BLF device in the format of a list displays the device status, phone numbers, and names.
The devices for the OfficeServ Operator consist of multiple groups. '*' is displayed at the left of
the BLF group created by default.
Group
*Total Station
*Total Trunk
*DTDS
*Speed
*Station Group
Number/Name
The user can add or modify a BLF group or device.
Entire system station
Entire system C.O.line
DT/DS button set in the operator station
Speed dial button set in the operator station
Station group selected optionally from the station groups of the
system
25
Description
Home Page
Table of Contents