E5@C Controller Setup; Checking Operation - Omron E5CC Communications Manual

6 Programless Communications
(5) We will write set values to the PLC.
When the following dialog box is displayed, click the Close Button to close it and cycle the
power to the PLC.
This completes the PLC setup procedure. You will use GX Works2 to check operation, so
leave it online.
6-9-4

E5@C Controller Setup

Set up programless communications. Perform the procedure that is given in 6-4-4 E5
Setup.
6-9-5

Checking Operation

Perform the checking operation given in 6-8-5 Checking Operation.
6 - 72 E5@C Digital Temperature Controllers Communications Manual (H175)
@
C Controller