Power Trim Fluid; Checking - Mercury TDI 3.0L Owner's Operation And Maintenance Manual

Section 4 - Maintenance
14. Quickly install the sealing washer and the fill and drain plug. Tighten the plug to the specified torque.
a
b
Description
Fill and drain plug
15. Install the sterndrive propeller. Refer to Propellers.
16. Check the level of the gear lube monitor after the first use.
IMPORTANT: The gear lube monitor level will change while the product is in use. Always check the gear lube level when the
sterndrive is cool and the engine is not running.

Power Trim Fluid

Checking

IMPORTANT: Check the fluid level with the sterndrive in the full down (in) position only.
1. Place the sterndrive in full down (in) position.
2. Observe the fluid level. The fluid level must be between the "MIN" and "MAX" lines on the reservoir.
a
3.
Fill as necessary with the specified fluid. Refer to Filling.
Page 50
mc79506-1
All Bravo models shown
a - Fill and drain plug
b - Sealing washer
b
a
19777
b b
b
Nm
6.8
a - Reservoir
b - "MIN" and "MAX" lines
7876
a
14621
lb‑in lb‑ft
60 —
90-8M0145546 MAY 2018
eng