Changing - Mercury TDI 3.0L Owner's Operation And Maintenance Manual

Section 4 - Maintenance

Changing

1. Remove the gear lube monitor from the bracket.
a
2. Empty the contents of the gear lube monitor into a suitable container.
3. Install the gear lube monitor in the bracket.
4.
Bravo One X Models:
a. Remove the propeller.
b. Lower the sterndrive to the full down (in) position.
c. Remove the gear lube fill and drain plug and the sealing washers.
d. Drain the gear lube into a suitable container.
a
b
5.
Bravo Three X Models:
a. Place the sterndrive in the full trim limit out position.
b. Remove the fill and drain plug and the sealing washers.
c. Drain the gear lube into a suitable container.
Bravo Two X
a - Fill and drain plug
b - Sealing washer
Page 48
b
a - Fill and drain plug
b - Sealing washer
mc79506-1
b
a
14621
a - Gear lube monitor bracket
b - Gear lube monitor and cap
c - Retaining strap
c
5500
Bravo Three X
b
a
19777
90-8M0145546 MAY 2018
eng