Schwinn 170 Service Manual page 43

Disconnect all power to the machine before you service it.
!
Note: Your machine may not match the image. For reference only.
1. Remove screws that attach Console to the Mast.
Carefully lift the Console off the Mast.
2.
Disconnect the Data Cable and Heart Rate Cable from
the back of the Console. Set the Console and screws safely
aside for reassembly.
Note: Do not let the cables fall down inside the Mast.
3. Remove the Mast Gasket. Set it safely aside for
reassembly.
4.
Bend the edges of the Top Shroud to disengage the in-
side tabs from the Main Assembly, and slide the Top Shroud
up the Mast.
5. Remove the hardware (indicated) from the Mast.
Gently pull the Mast out and disconnect the cables. Set the
hardware safely aside for reassembly.
NOTICE: Do not crimp the cables. This step may require
two people.
Note: Do not let the cable fall down inside the Frame.
43
X2