Schwinn 170 Service Manual page 39

Disconnect all power to the machine before you service it.
!
Note: Y our machine may not match the image. For reference only.
1. Remove screws that attach Console to the Mast.
Carefully lift the Console off the Mast.
2.
Disconnect the Data Cable and Heart Rate Cable from
the back of the Console. Set the Console and screws safely
aside for reassembly.
Note: Do not let the cables fall down inside the Mast.
This step may require two people.
3. Remove the Handlebar Bracket Cover and set it safely
aside for reassmbly.
4. Grasp the section of HR Cable under the Handlebar
Bracket and carefully pull the cable down through the Mast
and out of the hole in the Handlebar Bracket.
Note: Do not let the Data Cable fall down inside the
Mast.
39