Schwinn 170 Service Manual page 32

8. Remove the Mast Gasket. Set it safely aside for
reassembly.
9.
Bend the edges of the Top Shroud to disengage the in-
side tabs from the Main Assembly, and slide the Top Shroud
up the Mast.
10. Remove the hardware (indicated) from the Mast. Gently
pull the Mast out and disconnect the cables. Set the hard-
ware, Mast and Top Shroud safely aside.
NOTICE: Do not crimp the cables. This step may require
two people.
Note: Do not let the cable fall down inside the Frame.
32
X2