Schwinn 170 Service Manual page 36

Disconnect all power to the machine before you service it.
!
Note: Y our machine may not match the image. For reference only.
1. Remove screws that attach Console to the Mast.
Carefully lift the Console off the Mast.
2.
Disconnect the Data Cable and Heart Rate Cable from
the back of the Console. Set the Console and screws safely
aside for reassembly.
Note: Do not let the cables fall down inside the Mast.
This step may require two people.
3. Remove the Handlebar Bracket Cover and set it safely
aside for reassmbly.
4.
Tie the length of string to the end of the Heart Rate
Cable at the top of the Mast. Grasp the section of HR Cable
under the Handlebar Bracket and carefully pull the cable and
string down through the Mast and out of the hole so that the
string extends through the the Mast and Handlebar Bracket.
Note: Do not let the Data Cable fall down inside the Mast.
36