Linearization (Ltb) - Siemens SITRANS LR250 Operating Instructions Manual

7.1.9.4

Linearization (LTB)

You can use the linearization feature to define a more complex vessel shape and enter up to 32
level breakpoints where the corresponding volume is known. See Linearization (2.4.).
Navigate to Configure/Setup > LTB > Setup > Linearization and click on Linearization. Click on
the Vessel Shape tab to access the parameters listed:
Vessel Shape
● Vessel Shape [see Vessel Shape (2.4.1.1.)]
Vessel Dimensions
● Maximum Volume [see Maximum Volume (2.4.1.2.)]
● Vessel Dimension A [see Dimension A (2.4.1.3.)]
● Vessel Dimension L [see Dimension L (2.4.1.4.)]
OR
Click on Breakpoints tab for access to level and volume breakpoints.
Note
This parameter becomes accessible only after Linearization Table has been selected in
Vessel Shape above.
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC
Remote operation
7.1 Operating via AMS Device Manager
97