Configure/Setup (Level Transducer Block-Ltb); Identification (Ltb) - Siemens SITRANS LR250 Operating Instructions Manual

Remote operation
7.1 Operating via AMS Device Manager
7.1.9

Configure/Setup (Level Transducer Block-LTB)

7.1.9.1

Identification (LTB)

Navigate to Configure/Setup > LTB > Identification.
Identification:
● TAG: Read only. Description for the associated block: device tag prefixed by block type.
● Descriptor [see Descriptor (2.1.2.)]
● Transducer Block Type: Read only. Identifies the type of transducer block.
● Strategy: Used to identify grouping of blocks.
● Plant Unit: The identification number of the plant unit. For example, can be used in the host
for sorting alarms.
92
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC