Alarms & Errors (Ltb) - Siemens SITRANS LR250 Operating Instructions Manual

Remote operation
7.1 Operating via AMS Device Manager
7.1.13.1 Alarms & Errors (LTB)
Navigate to Device Diagnostics > LTB > Alarms & Errors.
Click on Block Error to open the dialog window to read the following:
Failures
● Input Failure
● Output Failure
● Memory Failure
● Lost Static Data
● Lost Non-Volatile Data
● Readback Check
● Device Fault State
● Block Configuration
● Link Configuration
● Other
Maintenance
● Maintenance Required
● Maintenance Demanded
Information
● Simulation Active
● Local Override
● Power Up
● Out of Service
XD Error
● Transducer Error
Click on Block Alarm to open the dialog window to read the following:
Unacknowledged
● Unacknowledged
Alarm State
● Alarm State
120
SITRANS LR250 (FOUNDATION FIELDBUS)
Operating Instructions, 08/2014, A5E32221411-AC