Table of Contents
Advertisement
Using the earphones
12 | MOMENTUM True Wireless
Charging case WITH
LED
earbuds inserted
pulses
... the earbuds and
yellow
charging case are being
charged
lights up
... the earbuds and
green
charging case are fully
charged
flashes red ... a charging error/battery
error has been detected in
at least one earbud (see
page 20)
Connecting the earphones to a Bluetooth
device
To be able to use the Bluetooth wireless connection, you must regis-
ter both devices (earphones and e.g. smartphone) via the device set-
tings of your smartphone. This process is called pairing.
If operation differs from the steps mentioned, also refer to the
instruction manual of the Bluetooth device you are using.
If you switch the earphones on for the first time after initial
charging, they automatically go into pairing mode.
Information on the Bluetooth wireless
connection
The earphones are compatible with Bluetooth 5.0.
If your audio source supports one of the following high-resolution
audio encoding methods, music is automatically played in high audio
quality: aptX, aptX® LL or AAC. Otherwise, the headphones will play
your music in normal audio quality (SBC).
Paired devices establish the Bluetooth wireless connection immedi-
ately after switch-on and are ready for use.
When you switch the earphones on, they automatically try to con-
nect to the last connected Bluetooth device. The earphones can save
the connection profiles of up to eight Bluetooth devices with which
they have been paired.
If you pair the earphones with the ninth Bluetooth device, the saved
connection profile of the least used Bluetooth device will be over-
written. If you want to re-establish a connection with the overwritten
Bluetooth device, you have to pair the earphones again.
Pairing the earbuds with a Bluetooth
device
1. Take both earbuds out of the charging case and insert them into your
ears (see page 14). The distance between the earbuds and the Blue-
tooth device should not exceed 50 cm.
Charging case WITHOUT
earbuds inserted
... the charging case is
being charged
... the charging case is
fully charged
... ... a charging error/
battery error has has
been detected in the
charging case (see page
20)
Hide quick links:
Advertisement
Table of Contents
