Pairing The Earbuds With A Bluetooth Device - Sennheiser SPORT True Wireless Instruction Manual

Pairing the earbuds with a Bluetooth
device
1
max. 1 m/40 inch
3 4
ON
1. Take both earbuds out of the charging case and insert them into
your ears (> 23). The distance between the earbuds and the Blue-
tooth device should not exceed 40"/1 m.
2. Simultaneously touch and hold the right and the left touch control
panel for 3 seconds until you hear the voice prompt "Pairing" and
a beep.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
From the list of found Bluetooth devices, select "SPORT True
Wireless". If necessary, enter the default pin code "0000".
If pairing was successful, you hear the voice prompt "Pairing suc-
cessful" and the LEDs of the earbuds flash blue 3x.
The Bluetooth device name "SPORT True Wireless" can be
changed individually using the Smart Control app.
If no connection is established within 1 minute, pairing mode is
terminated and the earbuds switch to idle mode. If necessary,
repeat the steps described above.
If the earbuds are not paired with any Bluetooth device (the
pairing list is empty), pairing mode is permanently active.
Switching the connection to paired
Bluetooth devices/"Connections"
To selectively switch the audio connection to paired Bluetooth
devices using the "Connections" function, you require the Smart
Control app (> 20).
2
R
3s
************
*********
SPORT
True Wireless
SPORT True Wireless | 17
Using the earbuds
"Pairing"
L
"Pairing
successful"
3x