Disconnecting The Earphones From A Bluetooth Device; Installing The Smart Control App; Selecting Suitable Ear Adapters For Optimum Fit Of The Earbuds - Sennheiser Momentum True Wireless Instruction Manual

2. Simultaneously touch and hold the right and the left touch control
panel for 5 seconds until you hear the voice prompt "Pairing" and a
beep sound.
The LEDs of the earbuds flash blue and red. The earbuds are in
pairing mode.
3. Activate Bluetooth on your Bluetooth device.
4. Via the menu of your Bluetooth device, start the search for new Blue-
tooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
5. From the list of found Bluetooth devices, select "MOMENTUM TW". If
necessary, enter the default pin code "0000".
If pairing was successful, you hear the voice prompt "Pairing suc-
cessful" and the LEDs of the earbuds flash blue 3 times.
If no connection is established within 1 minute, pairing mode is
terminated and the earbuds switch to idle mode. If necessary,
repeat the pairing procedure.
Disconnecting the earphones from a
Bluetooth device
▷
Via the menu of your Bluetooth device, disconnect the connection to
the earphones.
The earphones are disconnected from the Bluetooth device. The
earphones then search for other paired devices. If no device is
found, you hear the voice prompt "No connection". The earphones
go to idle mode.
If you want to clear the Bluetooth pairing list of the earphones,
reset the earphones to the factory default settings (see page
22).

Installing the Smart Control app

To be able to make full use of all the settings and functions of the ear-
phones, you need to have the free Sennheiser Smart Control app
installed on your smartphone.
Download the app from the App Store or Google Play and install it on
your smartphone. Alternatively, you can use your smartphone to
scan the following QR code or to call up the following Internet site:
www.sennheiser.com/device-control-app
▷ Connect your smartphone to the earphones using Bluetooth
(see page 12).
▷ Start the Smart Control app.
The Smart Control app recognizes the earphones and activates
all available settings and functions.
Selecting suitable ear adapters for
optimum fit of the earbuds
The perceived sound quality and bass performance of the earphones
depends to a large extent on the correct fit of the earbuds in the ear.
Using the earphones
MOMENTUM True Wireless | 13