Transferring Credits To The G4 Ex From The Credit Key; Figure 3-30 Application Credit Verification Codes - ABB XSeries G4 6200 User Manual

3.5.4 Transferring credits to the G4 EX from the Credit Key

Credits can be transferred to the G4 EX. The user selects the type of credits and
the amount of those credits to be transferred.
To transfer application credits to the G4 EX, the user will need to connect to the
G4 EX with PCCU32 7.0 or later.
1) Open PCCU32. Once open, move to the top of the tree-view, and click on
2) Install the credit key in an available USB port.
3) Click the Load button to view the available credits.
Page 3–28
Figure 3–30 Application Credit verification codes
If the G4 EX
transferred to the credit key to be used on the other meters. This
is discussed in a later section.
the App Licensing tab (see Figure 3–31).
This screen enables the user to see the licensing status of the G4
EX as well as the available credits on the credit key. The left pane
shows the type and amount of the available credits on the credit
key. The upper right pane is for information purposes only. It
shows the various available applications and the type/amount of
credits necessary to run the application. The standard credits (and
four general credits) are free with the purchase of the G4 EX. The
lower right pane displays the licensing status of the G4 EX. It
shows what credits are in the machine, what credits are being
used and any surplus or deficit of credits. A surplus of credits is
highlighted in green. A deficit of credits is highlighted in red.
has a surplus of credits, these credits can be
2104349 rev. AD