Figure 3-26 Security Log Tab - ABB XSeries G4 6200 User Manual

3.4.3.8
While it is currently possible to enable RBAC on a remote port, this will block any
access to the port since no host software currently supports RBAC.
3.4.3.9
Restricted applications
Applications not accessible to the currently connected user are not seen in the
left-hand tree-view within PCCU32. Functions that are restricted to the user are
disabled. When an application with Read Only functionality is accessed, the Send
button is also grayed out.
Calibration
In order for the user to perform a calibration, in addition to Calibration access
rights, a user must also have read/write access to the following applications:
-
-
-
-
-
-
Collection
In order to perform a collection, in addition to Collection access rights, a user must
also have Read access to the System application.
-
-
-
Page 3–24
Figure 3–26 Security Log tab
Remote communications
Access rights for common functions
System
Flow measurement
I/O subsystem
Display application
For calibrating wireless I/Os, the user must have Read/Write access to the
Wireless I/O application and the Communication Ports application.
For calibrating the XMV, the user must also have Read/Write access to the
XMV Interface application and the Communication Ports application.
For collecting tube data, the user must have Read access to the Flow
Measurement application.
For collecting trend data, the user must have Read access to the Trend
application.
For collecting analysis trend data, the user must have Read access to the
Analysis Trend application.
2104349 rev. AD