2.2.2 Type B
2.2.2.1
-
2.2.2.2
-
-
-
2.2.2.3
2104349 rev. AD
Figure 2–1 Type A Installation Configuration
The Type B installation configuration comes from the factory
with the transducer already enclosed in two attached
mounting brackets.
Materials supplied
G4 EX mounting kit assembly and associated hardware
Materials not supplied
One 2" x 40" pipe
Standard 3 or 5 valve manifold
Stainless steel tubing
Step-by-step instructions
To install the G4 EX, it is recommended that two people
perform the installation. One to hold the unit in position and
the other to install and tighten the mounting brackets.
The method of installation must be consistent with the user's
company policy.
Back Clamp
Pole Mount Bracket
Page 2–3