Figure 3-24 Login Dialog Box - ABB XSeries G4 6200 User Manual

3.4.3.6
When the user tries to connect to an RBAC enabled port on a G4 device, they are
first asked to login (see Figure 3–24).
The user can elect to save the user name/password as default credentials to be
used for subsequent logins. To change or disable the default RBAC credentials,
select the menu item, Operate > Setup > System Setup (see Figure 3–25).
After a security file is sent to a Totalflow G4 device, the user is disconnected from
the device and asked to re-login under the following circumstances:
-
-
-
Page 3–22
User login
RBAC security was not enabled on the connected port before the security
file is downloaded.
The user is not defined in the new security file.
The user has different access rights in the new security file.
Figure 3–24 Login dialog box
2104349 rev. AD