MSH300
5
Technical description
The heating elements for the MagicComfort seat heating MSH300 can be installed
in the driver's seat and in the passenger seat.
The shape of the seat is not altered by the heating elements.
The seat heater is operated using a switch.
6
Installing the seat heater
Tools required (fig. 1, page 3)
6.1
For installation and assembly you will need the following tools:
• Drill bit set (1)
• Drill (2)
• Screwdriver (3)
• Set of ring or open-ended spanners (4)
• Measuring ruler (5)
• Hammer (6)
• Centre punch (7)
To make and test the electrical connection, the following tools are required:
• Diode test lamp (8) or voltmeter (9)
• Crimping tool (10)
• Insulating tape (11)
• Hot air blower (13)
• Soldering iron (14)
• Solder (15)
• Cable bushing sleeves (if necessary)
To fasten the cables you may require additional cable binders.
EN
Technical description
13