Troubleshooting - Invacare HomeFill Oxygen System User Manual

7.2 Troubleshooting

No indicator lights on when compressor turned On.
RED Light On
1100873-M
Problem
1. Turn compressor Off.
2. Check that power cord is properly plugged into compressor
and wall outlet.
3. Turn the compressor On.
4. Clean air filters. 5.4 Refer to Cleaning the Compressor Filter
on page 33, page 24.
5. If performing Steps 1-4 does not cause any indicator
lights to come on, contact your home health care provider
or Invacare for service.
1. Check the cylinder gauge to see if it is full:
• Cylinder full - Remove the cylinder and turn the unit Off.
Perform the 4.1 Cylinder Prefill Inspection on page 20, page
17 with a cylinder that is not full.
• Cylinder not full - Proceed to Step 2.
2. Check that the cylinder is connected properly.
3. Turn the compressor Off.
4. Remove the cylinder and reinstall.
5. Turn the compressor On. If cylinder is not full and is
connected properly, the compressor may have internal failure.
Contact your home health care provider or Invacare.
Troubleshooting
Solution
29