Mira Advance User Manual page 4

Thermostatic electric shower 8.7 and 9.8 kw
Table of Contents

Advertisement

9. DO NOT allow children to clean or perform any user
maintenance to the shower unit without supervision.
10. DO NOT connect the outlet of the shower to any tap,
control valve, trigger handset or other device intended
to restrict the water outlet flow. Fit only the Kohler Mira
showerhead as supplied with this product, only Kohler
Mira recommended accessories must be used.
11. DO NOT perform any unspecified modifications, drill or
cut holes in the shower or fittings other than instructed
by this guide. When servicing only use genuine Kohler
Mira replacement parts.
12. If the shower is dismantled during installation or servicing
then, upon completion, an inspection must be made to
ensure all electrical connections are tight and that there
are no leaks.
13. There are no user serviceable components beneath
the cover of this appliance and ELECTRICAL MAINS
CONNECTIONS ARE EXPOSED IF THE COVER IS
REMOVED. Only a competent tradesperson should
remove the cover.
14. The water supplies to this product must be isolated if
the product is not to be used for a long period of time. If
the product or pipework is at risk of freezing during this
period they should also be drained of water.
15. ALWAYS switch off the appliance at electrical isolating
switch when not in use.
16. DO NOT position the handset to spray water directly on
to the appliance. E.g. when cleaning shower control.
17. The showerhead should be descaled regularly, a blocked
showerhead can restrict the flow rate and may cause
damage to the shower.
1306246-W5-A
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents