Ptz Camera Control Mode - Samsung Real Time SHR-2041 User Manual

SHR-2040/2041/2042 USER'S MANUAL
1

PTZ Camera Control Mode

●
●
●
6-1
English
Select a proper PTZ camera Configuration value in MENU to enter PTZ Control Mode.
Cam
1
2
3
4
Serial Mode:
Half Duplex
Selected in MENU, the PTZ symbol(
¦
If you press the Enter(
bar will appear in the monitor screen. Use direction keys to move this bar until you reach
the channel with the PTZ symbol and press the PTZ button in front of SHR-2040/2041/2042
to enter PTZ Camera Control Mode.
If you succeed in entering PTZ Camera Control Mode, the PTZ symbol on the monitor
screen will turn yellow from white while the PTZ button in front of SHR-2040/2041/2042 will
turn blue. PTZ Camera Control Mode supports Pan, Tilt, and Zoom operation.
PTZ TELE
PTZ Device
ID Protocol Baudrate Parity Data
002 Samsung 38400 None 8
001 Vic 38400 None 8
002 Pan. 19200 None 8
003 AD 38400 Even 8
OK
) is displayed on the channel in the screen.
PTZ
) button among direction keys in front of Split Screen, a blue
WIDE
VIEW PRESET
Stop
1
1
1
1
Cancel