Samsung Real Time SHR-2041 User Manual page 165

● Transfer Protocol
- You can change the transfer protocol setting value. The protocol supports
TCP/IP and UDP(Unicast, Multicast). Control Port(TCP/IP) and Port(UDP) to alter
the connection port. Both Multicast IP and TTL are used for UDP(Multicast).
● Callback
- You can set the Callback function of SHR-2040/2041/2042.
- In the event of Alarm, Motion Detection, or Video Loss, set the IP address and
port of PC where SmartViewer is installed to forward Callback messages. In
failure of message forwarding, set the value for retrial.
9-46
English