Monitoring - Samsung Real Time SHR-2041 User Manual

3

Monitoring

Event Monitoring
●
It is possible to set to Off / 3sec / 5sec / 10sec / 20sec / 30sec / Continuous.
① Off : Event Monitoring does not operate to turn to the screen where an event occurs.
➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
➂ Continuous : The Event Monitoring screen remains alive until you press the "Alarm"
OSG Display
●
① Date : The date is displayed on the screen when it is On, and not displayed when it is Off.
➁ Time : The time is displayed on the screen when it is On, and not displayed when it is Off.
➂ Cam name : The Cam name is displayed on the screen when it is on, and not displayed
➃ Status : Audio/Ptz is displayed on the screen when it is on, and not displayed when it is off.
Spot Out Channel
●
Spot Out channel is used to let one of two monitors monitor a channel, focusing on it.
Spot Out channel supplies two functions, continuous monitoring of only one channel and
Auto Sequence to display all the channels one by one.
① Auto Sequence setup ranges from Ch1 to Ch 4.
➁ In the Auto Sequence mode, Spot Out channels are displayed in turn.
➂ Duration time for Auto Sequence is as same as set for Camera setup.
Spot Out Event Monitor
●
Sets if event monitoring will be executed for Spot Out channels.
① Off : The event monitoring dose not operate in the Spot Out channel.
➁ 3sec / 5sec / 10sec / 20sec / 30sec : Sets the duration time of screen in the Auto
➂ Continuous : Once scrolled down, the screen remains displayed until you delete "Alarm"
Monitoring
Event Monitoring Duration
OSG Display Date
Time
Title
Status
Spot Out Channel CH1
Spot Out Event Monitor Off
Monitor Out Composite Out
Sequence mode.
button in the front to cancel the screen manually.
when it is off.
Sequence mode.
LED in the front manually.
Off
On
On
On
On
OK Cancel
5-18
English