Samsung Real Time SHR-2041 User Manual page 134

SHR-2040/2041/2042 USER'S MANUAL
●
●
●
9-15
English
Screen Split Selection Button
- Full Screen / Single / Quad / Nine-Split / Sixteen-Split Mode
- You can change the Split Mode of the screen under monitoring.
Sequence Mode Button
- Changes the channel to be played at the preset interval.
- The sequence time interval can be set at the Setup Mode ➝ Viewer Setup.
- In Single Mode : 1 ➝ 2 ➝ 3 ➝ 4 ➝ 1 (CH)
- In Quad Mode : 1,2,3,4 ➝ 1,2,3,4 (CH)
- In Nine-Split Mode : 1,2,3,4 ➝ 1,2,3,4(CH)
- In Sixteen-Split Mode : 1,2,3,4 ➝ 1,2,3,4 (CH)
Note
Note
If you connected with multi-DVRs(SHR-2040/2041/2042) through a site, the sequence will
operate as follows.
- In Single Mode : DVR1:3CH ➝...➝ DVR1:4CH ➝ DVR2:1CH ➝...➝ DVR1:1CH
- In Quad Mode : DVR1:1,2,3,4CH ➝...➝ DVR2:1,2,3,4CH
- In Nine-Split Mode : DVR1:1,2,3,4CH ➝ DVR2:1,2,3,4CH ➝... DVR3:1,2,3,4CH
- In Sixteen-Split Mode : DVR1:1,2,3,4CH ➝ DVR2:1,2,3,4CH ➝ DVR3:1,2,3,4CH
Monitoring screen condition Information / Selection Button
- Displays the Split or Monitoring condition of the screen in play.