Advertisement
A PreAlarm is an alarm that sounds during the
cook cycle. PreAlarms can be used to alert the op
erator that the product needs to be turned or
stirred, etc. Up to three PreAlarms can be pro
grammed for each product.
1. The top display reads A1. The bottom display
gives the alarm time. Use the product keys to
enter the desired time for the first alarm. Press
the ENTER KEY (13) to enter the PreAlarm
time.
NOTE: PreAlarm times are measured from the
end of the total cook time. For example
if the total cook time is 30:00 and a
PreAlarm of 5:00 is entered, the alarm
will sound 25 minutes into the cook
cycle. If a PreAlarm of 0:00 is entered,
no additional PreAlarms may be pro
grammed for the selected product key.
2. Press the SCAN KEY (14).
3. The top display reads AUTO. The bottom dis
play reads either YES or no. Press the
TOGGLE/CLEAR KEY (10) to toggle between
YES and no. Press the SCAN KEY (14) to enter
the PreAlarm type.
NOTE: An auto PreAlarm sounds for approxi
mately 5 seconds, then shuts off auto
matically. For manual PreAlarms the
operator must press the product key
to silence the alarm.
4. The top display reads A2__. Repeat steps 1-3
for the second and third PreAlarm. When all
PreAlarms have been entered the control ad
vances to programming the head count.
1. The top display reads HEAd. The bottom dis
play gives the current number of heads pro
grammed for this product key. Use the prod
uct keys to enter the desired number of heads
from 1-99.
2. Press the SCAN KEY (14). The programming
for this recipe is now complete.
1. The top display reads Prod. Press the PROG
KEY (9). The control returns to operating
mode.
35
Advertisement
