Advertisement
1. Used to manually reduce the set temperature
temporarily during times of infrequent cook
ing. Press the SETBACK key once to reduce
the set temperature to the pre programmed
setback temperature.
2. Press the SETBACK key again to exit Setback
and warm back up to the operating tempera
ture.
Programming Mode for the Vision Controller is en
tered by pressing the P" key for three (3) sec
onds. The following programming mode is avail
able on the VVC 208 as follows:
Employees
Managers
System
Recipe
Product Name
Library
Alarm Library
SCK Address
NOTE: Pressing the P" key saves the previous
parameter.
NOTE: If no key is pressed within 2 minutes while
in Programming mode, the controller will
automatically return to idle mode.
NOTE: All scrolling will loop back through al
lowed values.
15
1724
6647
n/a
X
X
n/a
X
X
X
X
X
X
Advertisement
