Advertisement
1. Mount the vent shield with the vent guard.
Align the mounting holes in the vent shield
with top holes in the vent guard.
1. Connect the upper and lower flues with the
vent riser. Mount the vent shield with the vent
riser. Align the mounting holes in the vent
shield with top holes in the vent riser.
Vent
Vent
Guard
Shield
Vent
Vent
Riser
Shield
11
1. Mount the vent shield with the vent guard.
Align the mounting holes in the vent shield
with top holes in the vent guard.
2. Insert the flue extension over the flue on the
Mark V. Attach using screws provided.
NOTE: If the oven has a vent guard it must be
removed before installing the flue ex
tension.
3. Slide the flat plate of the flue brace under the
top cap on top the CTBR AP . The two holes in
the end of the brace must line up with the
holes in the flue extension.
4. Attach the flue brace to the flue extension with
the screws provided.
Vent
Guard
Flue
Brace
Flue
Extension
Top Cap
Vent
Shield
Advertisement
