Monitor Connection - EverFocus EMV1200 FHD Quick Installation Manual

2.11 Monitor Connection

By default, the mobile DVRs provide 1 Main Monitor port (VGA) and 2 Call monitor ports (BNC
and RCA). All of the Main and Call Monitor ports can be used simultaneously.
System configuration can only be operated on the Main Monitor. Call monitor can only display
camera streams or perform sequence display mode. The two call monitor outputs provide the
identical functionality.
Make sure that the connected monitor's specifications comply with these resolution requirements.
(This figure uses EMV1200 FHD mobile DVR as an example).
Front Panel
RCA Cable
You can also optionally switch the RCA / BNC video output from call monitor to main monitor;
and mean while, switch the VGA video output from main monitor to call monitor. To do this,
press the Function Key on the front panel for 3 seconds, the system will start rebooting. Once
the system reboot process is complete, the Main and Call monitors will be switched (see
image below). To switch back the main and call monitors, press the button for 3 seconds
again.
Front Panel
RCA Cable
Function
Key
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
VGA Cable
Call Monitor
Main Monitor
Call Monitor
Main Monitor
17
Rear Panel
BNC Cable
Call Monitor
Rear Panel
VGA Cable BNC Cable
Main Monitor
9-12 CH
9-12 CH