Table of Contents
Advertisement
No. Name
Main Monitor
1
(VGA)
2
Antenna 1 (3G/4G)
3
Antenna 2 (4G)
Antenna 3 (Wi-Fi)
4
(2.4GHz / 5GHz)
Antenna 4 (Wi-Fi)
5
(5GHz)
6
Audio Input
7
D-Sub Connector
8
Ethernet Port (LAN)
9
Call Monitor (CVBS)
10
USB Port
11
Video Input
12
GPS Data Input
12VDC Power
13
Outputs
14
DC Power Input
EMV1200 FHD / EMV800 FHD Hybrid Mobile DVR
Description
By default, this port is set to a Main monitor output. Connects to a
Main monitor using a VGA cable.
Note: You can optionally switch this port from Main monitor to
Call monitor. Please refer to 3.8 Monitor Connection for more
details.
Connects to the 3G or 4G Antenna for using 3G / 4G LTE function.
Connects to the 4G Antenna for using 4G LTE function. Note that
the 4G function is required to use both Antenna 1 and 2.
Connects to the Wi-Fi Antenna for using Wi-Fi (2.4GHz / 5GHz)
function.
Connects to the Wi-Fi Antenna for using Wi-Fi (5GHz) function.
Note that the 5GHz Wi-Fi function is required to use both Antenna
3 and 4.
D-Sub connector for connecting to the supplied Audio Cable. For
details, please refer to 3.3 Audio Cable. Microphones with a
(built-in) amplifier and external power supply are required.
D-Sub connector for connecting to the Alarm I/O, RS-232 (CAN
bus) or RS-485 devices (such as analog PTZ cameras). For details,
please refer to 3.4 D-Sub Cable.
M12 connector for connecting to IP cameras. For details, please
refer to 3.5 Ethernet Cable.
By default, this port is set to a Call monitor output. Connects to a
Call monitor using a BNC cable.
Note: You can optionally switch this port from Call monitor to
Main monitor. Please refer to 3.8 Monitor Connection for more
details.
USB ports for connecting to the USB device. For details, please
refer to 3.6 USB Cable.
M12 connector for connecting to the supplied Video Cable. You
can then connect analog HD / SD cameras to the Video Cable.
Please refer to 3.2 Video Cable / Power-Out Cable.
Connector for connecting to the GPS receiver. For details, please
refer to 3.7 GPS Cable.
A total of 12VDC, 5A power supply to the connected cameras.
Please refer to 3.2 Video Cable / Power-Out Cable.
Use the supplied Power Harness Cable for connecting to 9 ~
36VDC power source. For details, please refer to 4 Vehicle
Connection.
5
Advertisement
Table of Contents
