Monitor Connection - EverFocus eZ.HD ECOR FHD 16x1 User Manual

2.3.1

Monitor Connection

Connect the monitor to the CVBS, HDMI or VGA port on the rear panel of the DVR. The ECOR
FHD 16x1 DVR provides 2 main monitor outputs with identical functionality - VGA and HDMI,
and one call monitor output - CVBS.
Note that the Call Monitor (CVBS) can only be used to display camera views. The functions
including the layout, channel switching, icon display, sequencing mode of the Call Monitor can
only be configured on the Main Monitor.
Both outputs can be used simultaneously and deliver full HD output resolution (1920x1080,
progressive, 60 Hz. vert., 68 KHz hor.). Resolution selected higher than the monitor can
support may cause the screen to black out after rebooting the DVR. Please refer to 6.6.1
Monitor OSD.
You can also optionally connect the monitors to each Loop Video Output to display the video
of the corresponding channel.
Loop Video Output
Note:
1. The connected monitors' specifications must comply with the resolution requirements.
2. Do not exceed the max. HDMI cable length of 15 meters. The standard HDMI cables can
support cable length up to 3 meters. For longer distances, such as 15 meters, it is highly
recommended to use high quality HDMI cables.
Rear View
BNC
Cable
1~16 (BNC)
CVBS HDMI
Cable Cable
Call Monitor Main Monitor
(CVBS) (HDMI)
16
ECOR FHD 16x1 DVR
VGA
Cable
Main Monitor
(VGA)